
Hollow Glass Sphere HL35
- HL35
- 0.33-0.37g/cm³
- 0.18-0.21g/cm³
- D50 ≤40μm
- D90 ≤70μm
- 21MPa / 3000PSI
Specification
Type |
True Density (g/cm³) |
Bulk Density (g/cm³) |
Compressive Strength (Mpa/Psi) |
D50 (µm) |
D90 Typical Value (µm) |
Application |
HL15 | 0.13-0.17 | 0.08-0.09 | 4/500 | 85 | 120 | Epoxy Tooling Board, Solid Buoyancy Materials(SBM), Emulsion Explosives, Car Repair Putty, Paints and Coatings |
HL20 | 0.18-0.22 | 0.10-0.12 | 4/500 | 65 | 110 | Epoxy Tooling Board, Solid Buoyancy Materials(SBM), Emulsion Explosives, Car Repair Putty, Paints and Coatings |
HL25 | 0.23-0.27 | 0.13-0.15 | 5/750 | 65 | 100 | Thermal Insulation Coatings, Sealants and Adhesives, Solid Buoyancy Materials(SBM) |
HL30 | 0.28-0.32 | 0.15-0.18 | 10/1500 | 55 | 85 | Thermal Insulation Coatings, Solid Buoyancy Materials(SBM) |
HL32 | 0.30-0.34 | 0.17-0.19 | 14/2000 | 45 | 80 | Paints and Coatings, SMC/BMC, Sealants and Adhesives, Putty |
HL35 | 0.33-0.37 | 0.18-0.21 | 21/3000 | 40 | 70 | Cementing Slurry, Low Density Drilling Fluids |
HL38 | 0.36-0.40 | 0.19-0.22 | 38/5500 | 40 | 65 | Paints and Coatings, SMC/BMC, Automotive Underbody Coating, Solid Buoyancy Materials(SBM) |
HL40 | 0.38-0.42 | 0.19-0.23 | 28/4000 | 40 | 70 | Cementing Slurry, Low Density Drilling Fluids,Thermal Insulation Coatings |
HL42 | 0.40-0.44 | 0.21-0.24 | 55/8000 | 40 | 60 | Cementing Slurry, Low Density Drilling Fluids |
HL46 | 0.44-0.48 | 0.23-0.26 | 41/6000 | 40 | 70 | Cementing Slurry, Low Density Drilling Fluids, SMC/BMC |
HL50 | 0.48-0.52 | 0.25-0.27 | 55/8000 | 40 | 60 | Cementing Slurry, Low Density Drilling Fluids |
HL60 | 0.58-0.62 | 0.29-0.34 | 83/12000 | 40 | 65 | Cementing Slurry, Low Density Drilling Fluids |
HL60S | 0.58-0.63 | 0.30-0.34 | 124/18000 | 35 | 55 | Cementing Slurry, Low Density Drilling Fluids |
HS20 | 0.18-0.22 | 0.10-0.12 | 7/1000 | 60 | 90 | Epoxy Tooling Board, Solid Buoyancy Materials(SBM) |
HS22 | 0.20-0.24 | 0.11-0.13 | 8/1200 | 45 | 70 | Epoxy Tooling Board, Solid Buoyancy Materials(SBM), Emulsion Explosives, Car Repair Putty, Paints and Coatings |
HS28 | 0.27-0.30 | 0.15-0.17 | 28/4000 | 45 | 65 | Solid Buoyancy Materials(SBM), SMC,Sealants and Adhesives |
HS38 | 0.36-0.40 | 0.19-0.22 | 38/5500 | 30 | 50 | Composite Circuit Board, SMC,Sealants and Adhesives |
HS42 | 0.40-0.44 | 0.21-0.24 | 55/8000 | 25 | 40 | Rubber, Shoe Material, Sealants and Adhesives, SMC, Cementing Slurry |
HS46 | 0.44-0.50 | 0.22-0.25 | 110/16000 | 20 | 30 | 5G Related Plastic, Engineering Plastic |
HS60 | 0.58-0.62 | 0.29-0.33 | 193/28000 | 16 | 25 | 5G Related Plastic, Engineering Plastic |
HS65 | 0.63-0.67 | 0.30-0.33 | 207/30000 | 13 | 20 | 5G Related Plastic, Engineering Plastic |
HS70 | 0.75-0.80 | 0.33-0.35 | 207/30000 | 10 | 15 | 5G Related Plastic, Engineering Plastic |
HM10 | 1.50-1.60 | 0.40-0.43 | 193/28000 | 5 | 10 | |
HM15 | 1.30-1.40 | 0.39-0.42 | 124/18000 | 10 | 15 | |
HM20 | 1.00-1.10 | 0.38-0.40 | 124/18000 | 12 | 20 | |
HM30 | 0.80-0.90 | 0.34-0.37 | 83/12000 | 20 | 30 | |
HM30A | 1.00-1.10 | 0.38-0.40 | 83/12000 | 12 | 30 |
Product Description
Hollow Glass Microspheres is a kind of hollow spherical powdered ultralight inorganic nonmetallic materials.
The Properties of Hollow Glass Microsphere :
Pure white color, Hollow Glass Microsphere can be widely used in products which have high requirements for looks and colors.
Low density, reducing the products’basic weight obviously after filling. (the density of HGS is one out of a dozen of traditional filler particles' density). Relatively large volume, which can substitute and save more resins, reducing cost.
High dispersion and good fluidity, dimensional stability, reduced warpage and shrinkage when used as additives.
Heat insulation, sound insulation, mostly used as heat insulation paints and coatings, automotive sealants.
In addition, corrosion resistant, fire resistant, non-conducting.
Application Area
a. lightweight cement, low-density oil well cementing slurry & low-density drilling fluids additive.
b. low-density FRP(fiberglass-reinforced plastic), SMC, BMC composites.
c. Nylon, PA, PA6, PA66 for reducing weight.
d. low-density adhesives & sealants.
e. heat insulation paints and coatings.
f. Construction (reducing warpage/shrinkage).
g. Insulation and Buoyancy.
h. artificial marble.
Our hollow glass microspheres can be used in paint and coatings, construction sealant, rubber, plastic, FRP, artificial stone, putty and other products as filler and weight-reducing agent. The glass bubbles can also be used to produce high-strength, low-density cement slurry and low-density drilling fluid in oil and gas extraction industry. more and more industries now trying to testing the hollow glass spheres as additives to improve their products' properties.
Related Applications
Application of Hollow Glass Sphere in Drilling Fluids and Cementing Slurry
Application of Hollow Glass Sphere in Plastic PA6 PA66
Application of Hollow Glass Sphere in Sealants and Adhesives
Application of Hollow Glass Sphere in Epoxy Tooling Board
Application of Hollow Glass Sphere in Marine Buoyancy Modules
Application of Hollow Glass Sphere in Thermal Insulation paints
Application of Hollow Glass Sphere in Emulsion Explosives
contact us
We will store the information you have provided us. We will only use this information for the purpose of helping to answer your inquiries. We will not disclose your information to third parties.