HS42
Category:
Hollow Glass Sphere HS Series
WhatsApp:
E-mail:
Details Introduction
Hollow Glass Microspheres HS42 is a high-strength, low-density polymer additive made of water-resistant, chemically stable borosilicate glass. This hollow glass bead is designed to be used in rubber, shoe materials and adhesives to reduce weight and cost.
Hollow glass microspheres have strong and stable compressive strength while maintaining low density characteristics, and are widely used in cement slurries for oil field cementing.
Packing type | Packing size cm | Net weight |
paper bag | 60*35*15 | 11kg |
Container Bag | 100*100*115 | 280kg |
Instructions for use
Maintain product flow characteristics:
HL15 shall be stored in unopened original packaging under ventilated and dry environment with air humidity less than 40%.
According to the recommend storage conditions, the fluidity of the product is maintained for at least two years from the date of production.
to prevent the rupture of hollow glass beads:
If the product is strictly processed, it may break. To minimize breakage, minimize exposure to high shear processes and point contact shear, such as gear pumps and three-roll mills. When adding to the drawing material, the material should pass through a side feeder or a top feeder (similar to adding glass fiber).
Product Storage, Operation and Safety
Storage Precautions:
Ideal storage conditions include unopened cartons, which should be in a dry and temperature-controlled warehouse. Exposure of Hollow Glass Sphere to conditions of high humidity and/or easy condensation for a long time may cause microagglomeration of Hollow Glass Sphere.
To minimize the possibility of caking and thus maximize the shelf life, the following recommendations are made:
1. Immediately after use, carefully re-fasten the opened bag.
2. If the polyethylene bag is punctured during transportation or handling, the hole should be sealed as soon as possible or the contents should be inserted into an undamaged bag.
3. In hot and humid months, store the box in a cool and dry place. If the storage conditions cannot be controlled, the minimum inventory is carried and used according to the first-in-first-out principle.
Operation Precautions:
Because HS38 Hollow Glass Sphere have the characteristics of light weight and small particle size, dust may be generated during handling and processing.
To minimize fugitive dust during handling, consider the following:
1. Do not open the Hollow Glass Sphere package before use.
2. When opening, local dust extraction is carried out near the opening to suck out the floating particles (dust removal equipment is recommended).
3. Use a diaphragm pump (micro positive pressure ventilation) to extract the Hollow Glass Sphere and enter the closed mixing tank through a completely closed pipe. If there is no closed mixing tank, dust removal equipment should be used as close as possible to the inlet.
For container inner bag packaging, the pneumatic conveying system can be used to successfully transport Hollow Glass Sphere from the container to the storage tank or batch mixing equipment without dust removal (it is recommended to consult the relevant equipment supplier).
4. A static eliminator should be used to prevent static buildup.
Safety Precautions:
1. In order to protect workers, please use goggles with side guards during operation to prevent glass beads from entering the eyes.
2. Wear a safe and effective dust mask.
3. Appropriate dust removal equipment is equipped in the working area where Hollow Glass Sphere are used.
4. Refer to the safety data sheet (MSDS) attached to the Saint Wright Hollow Glass Sphere.
online message
Related Products